PRODUCTS

AS CAST BILLETS and BLOOMS

The current Concast facilities were last updated in 2012 with the addition of an on strand EMS and the upgrade of the oscillation system from mechanical to hydraulic. In 2015 a JUMBO caster SMS, Germany was added to our existing facilities. The billets and blooms are hot stamped automatically for subsequent traceability.

  Available sizes:
1.) Sharp corner square as cast billets135 mm (5.31 inches)
160 mm (6.29 inches)
2.) Sharp corner square as cast blooms240 mm (9.44 inches)
3.) Rectangular as cast blooms280 x 300 mm (11.02 x 11.81 inches)
4.) Round as cast blooms30 mm (11.81 inches)
310 mm (12.20 inches)
406 mm (15.98 inches)
500 mm (19.68 inches)
HOT ROLLED BARS and BILLETS

Our rolled products are divided into two categories according to the mill in use. The medium section mill provides the round bars up to 100 mm and the flat and hexagonal bars. The large section mill provides the square and round bars above 75 mm and large flat bars.

 Range:
1.) Round bars hot rolled, fully inspected & conditioned**18 - 220 mm
2.) Hot Rolled + Flat barsWidth Range: 50 – 120 mm (1.96 – 4.72 inches)
Thickness Range: 5 – 60 mm (0.19 – 2.36 inches
3.) Hexagonal bars++18 – 71 mm (0.71 – 2.80 inches)
4.) Round corner square hot rolled, fully inspected and conditioned billets*50 mm (1.96 inches) to 240 mm (9.44 inches)
INGOTS

The current ingot casting shop is capable of several sizes and uses the bottom pouring method. The latest revisions were made in 2013 with the addition of a new shrouding system, allowing for better quality control. The majority of the ingots are delivered to our large section mill for rolling, although as cast ingot products are also available.

 Range:
1.) Square Tapered Ingots480 x 480 mm (18.89 inches)
- 2.25 tons (4960 lbs.)
550 x 550 mm (21065 inches)
2.85 tons (6280 lbs.)
2.) + 595 Ingots710mm (27.95 inches)
- 5 tons (11,023 lbs.)
3.) Polygonal Ingots710mm (27.95 inches)
- 5 tons (11,023 lbs.)
*May vary according to grade and size requested
**For exact sizes produced, please consult below. All sizes 100 mm (3.9 inches) and below can be produced at 0.1 mm (0.04 inch) intervals

+For exact size, range, and profile descriptions please consult tech sheet page, linked below
++For exact sizes available please consult tech sheet below